Flat Roof & TPO Cost in Julian, CA.

Flat roof replacement in Julian typically runs $12-$22 per sq ft installed. Low-slope membrane roofing priced per square foot: TPO, modified bitumen, or built-up, plus tapered insulation, drains, and parapet flashing. Backcountry and mountain jobs add drive time, and most of this zone sits in a designated fire hazard severity area, so Class A fire-rated assemblies, ember-resistant venting, and boxed-eave detailing are standard and raise the quote.. The matched roofer sets your exact number after a free on-site look, and there is no mileage upcharge for Julian.

Across Julian Historic District, Wynola, Pine Hills, Cuyamaca-adjacent and the rest of Julian, the biggest cost swing is the existing roof, its size, pitch, material, and what a tear-off uncovers, not the ZIP code. Backcountry and mountain jobs add drive time, and most of this zone sits in a designated fire hazard severity area, so Class A fire-rated assemblies, ember-resistant venting, and boxed-eave detailing are standard and raise the quote.

Flat and low-slope roofs in Julian run about $11 to $18 per square foot installed, TPO at the top for its heat reflectance and lifespan, modified bitumen and built-up lower. A 1,200 square foot low-slope section lands roughly $14,000 to $22,000 depending on membrane, insulation, and how many penetrations need flashing.

If the existing membrane is sound and dry underneath, a silicone or acrylic restoration coating at $3 to $7 per square foot can add years for a fraction of a tear-off. If the insulation is wet or the seams are failing, coating just traps the problem, the matched roofer moisture-tests before recommending it.