A box gutter (built-in gutter) is a trough in the roof edge, often wood lined with metal. It is common on older craftsman and bungalow eaves in North Park, Mission Hills, Kensington, and South Park. It is not a sectional K-style hung on fascia. Seamless vs sectional already flags this as a third system. This page is that system.

Top Pro Roofing SD refers licensed independent contractors. We do not line box gutters. Call (760) 750-5557. Confirm the license on the CSLB lookup. Service: gutter installation. Historic overlay may also need a carpenter and, in a historic district, the city’s historical desk. City of San Diego IB 123 still governs covering work in the city; historic designation is a separate trigger in that bulletin.

Open built-in box gutter on a peeling San Diego craftsman eave

How a box gutter fails

The liner (copper, galvanized, or a later membrane) cracks at joints and outlets. Water then sits in the wood trough. The fascia and rafter tails rot from the inside. From the street you see peeling paint and a stain under the eave. The hung-gutter repair playbook does not apply. You cannot “seal the miter” on a liner you have not opened.

Coastal galvanized liners rust. Copper liners last longer and still need joints. Do not dump a modern aluminum K-style on the face of a boxed eave and call it done unless the written scope says you are abandoning the box and changing the edge. That is a design change, not a patch.

What the inspection should open

  1. Liner metal and joint method.
  2. Wood behind the liner, with photos of rot.
  3. Outlet and downspout path. Built-in outlets clog with eucalyptus and plaster.
  4. Whether the roof covering laps into the box correctly.
  5. Historic-district or mill-jurisdiction notes for that address.

A liner relay with sound wood is one job. Rotted trough framing is carpentry plus lining. Hung gutters on a rebuilt fascia is a third, and it changes the elevation. Ask which of those three you are buying.

Call (760) 750-5557 if the leak is at an old boxed eave and you need a licensed independent pro who will treat it as a built-in trough, not a 10-foot section from the truck.