Ridge cap is the covering along the peak. Ridge vent is a ventilation slot under some of those caps. Mixing them is how a homeowner buys a vent conversation when the actual failure is a cracked cap. Vent choice lives on ridge vent vs box vent. This page is the cap itself.

Top Pro Roofing SD refers licensed independent C-39 roofers. We do not nail caps. Call (760) 750-5557. Confirm the license on the CSLB lookup. Service: asphalt shingle roofing.

Cracked and lifting asphalt ridge caps on a San Diego shingle roof

Why caps fail here

Santa Ana events and west winds hit the peak first. Cut-down three-tab caps, leftover from an old field, crack and fly. Factory ridge cap is a different profile with a different nail pattern. Inland UV cooks the seal strip. Coastal lots add salt at the nails.

A few missing caps can be a targeted reset if the field is sound. A ridge that is bald for a long run, with wet deck underneath, is not a cap-only job. Ask for photos of the deck at the peak.

Tile ridges are a different system: mortar or dry-ridge, covered on mortar-set vs foam-set tile.

What the written scope should say

  1. Factory cap vs cut-down field shingles.
  2. Nail type, length, and pattern, including high-wind listing if the field used one: 150 mph wind-rated shingles.
  3. Whether a ridge vent stays, is added, or is closed. That is a ventilation decision, not a free extra.
  4. Color match. Caps from a new lot will not match a ten-year field. Say so.
  5. Whether hips are in the same scope. Hips take wind too.

Do not climb a two-story peak after a Santa Ana to “tap the caps back.” Call (760) 750-5557 for a licensed independent roofer to name cap versus vent versus a larger reroof.