“Set method” on a tile roof is at least two jobs. Field tiles may be bedded in mortar, set on foam adhesive, hung on battens with fasteners, or some mix the manufacturer allows. Hip and ridge caps are often a separate mortar or dry-ridge system. Mixing those on one vague line is how two bids look comparable and are not.
Top Pro Roofing SD refers licensed independent C-39 roofers. We do not set tile. Call (760) 750-5557. Confirm the license on the CSLB lookup. Service: tile roofing.
Eave openings: tile roof bird stops. Weight and clay vs concrete: concrete vs clay tile.
Field mortar, field foam, and mechanical hang
Mortar-set field. Traditional bedding. Mortar holds the tile and fills irregular decks on older clay roofs in Mission Hills, Kensington, and North Park. It is heavy. It cracks with thermal cycling. Repair often means grinding and re-bedding a zone, not a dab of caulk.
Foam-set field. Polyurethane roof-tile adhesive in dabs or beads on the underlayment or batten per the foam and tile makers. It is lighter than a mortar bed. It depends on surface prep, temperature during application, and the listed pattern. Inland summer decks in El Cajon and Escondido get hot. Application windows belong on the product sheet, not as a guess from this page.
Mechanical / batten. Many modern concrete S-tile systems hang on battens with nails or screws at the manufacturer spacing, with foam or mortar only where the sheet requires it. Wrong batten size is a common failure the tile service page already flags.
None of those is automatically “better.” The listed assembly for that tile, underlayment, and climate is the rule. Ask for the evaluation report or manufacturer install guide in the quote packet.
Ridge and hip are not the field
Original mortar-set ridge and hip caps crack. Santa Ana wind then loosens a cap. That shows up in Rancho Bernardo, Poway, Scripps Ranch, and canyon lots. Modern dry-ridge systems use mechanical fastening plus closures. Local guides on this site already separate that from field tile.
A foam-set field with a mortar ridge is a real combination. A mortar field with a dry ridge is another. Write both. “Foam roof” as a tile bid line is noise.
What San Diego weather does to each
Heat and UV. Inland valleys cook mortar and cook foam that was applied outside its window. South and west hips take the cycling.
Salt. Mortar and foam are not the metal. Flashings and fasteners at the eave still follow the coastal ranking: coastal salt. Bird-stop plastic at those same eaves UV-cracks: bird stops.
Wind. Field tiles that are only in a skim of old mortar, with no fastener where the sheet wants one, walk. Caps on tired mortar walk first. Ask the bid for the wind listing of the assembly, not a countywide mph.
Foot traffic. HVAC and solar crews break tile regardless of set method. Foam does not make a tile unbreakable. Lift-and-relay still needs a tile-experienced crew: how to maintain a tile roof.
What the written scope should separate
- Field method (mortar, foam, mechanical, mix) plus product names.
- Hip and ridge method, as its own line.
- Underlayment product, because the set sits on it: roof underlayment types.
- Batten size and spacing if battens are in the system.
- Eave closures.
- Whether this is a zone repair or a full relay.
Permit path still sits with the AHJ. City of San Diego IB 123 is not Oceanside and is not the county desk.
Call (760) 750-5557 to match a licensed independent tile roofer who will name field set and ridge set as two lines.