A skylight is a glazed unit in the roof. A sun tunnel (tubular daylighting device) is a small roof dome, a reflective tube, and a ceiling diffuser. Both bring daylight. They cut the roof differently, they leak at different perimeters, and they dump heat into different rooms.
Top Pro Roofing SD refers licensed independent C-39 roofers. We do not install skylights or tunnels. Call (760) 750-5557. Confirm the license on the CSLB lookup. Service: skylight installation.
Leaks at existing glass: skylight leak repair in Encinitas. Framing a new opening: roof framing for a new skylight.
What each one is
Skylight. A curb-mounted or deck-mounted glazed unit. You see sky. You can specify venting, blinds, and a larger daylight patch. The roof opening is the size of the unit plus the curb and flashing kit. On tile, the flashing kit has to meet the tile courses. That complexity is already on the skylight service page.
Sun tunnel / TDD. A small roof dome (confirm the model diameter on the sheet), a rigid or flexible tube, and a ceiling fixture that looks like a round light. The roof cut is small. The tube can dogleg through an attic to a hallway that has no roof directly above it. You do not get a view. You get a daylight patch with less glazed area.
Unit skylights have a cricket exception in CRC R903.2.2 when they are installed and flashed per the manufacturer (see chimney cricket). A chimney still follows the 30-inch rule. Do not mix those.
Heat, UV, and San Diego rooms
South and west glass on an inland house (Escondido, El Cajon, Poway) is a solar oven unless the unit is listed for that. A tunnel still brings light. It brings less glazed area, so the heat dump is usually smaller, which is why hallways, closets, and interior baths are the usual tunnel rooms.
Coastal lots add salt at the flashing, not at the glass. Aluminum and listed flash kits matter more than the brand name on the diffuser. Tile roofs in Encinitas and Carlsbad still need a tile-capable flashing, whether the unit is a curb skylight or a small dome.
Title 24 fenestration and U-factor rules for a true skylight are energy-code items. A TDD is specified as its own product. Ask the independent pro which code path the AHJ wants for that opening. Do not treat a tunnel as “not a skylight so no permit.” Permits sit with the desk that owns the address.
Leak paths
A skylight leaks at the uphill flashing, the corners, and a failed seal. Water can travel and stain a ceiling downhill of the glass.
A tunnel leaks at the roof dome flashing and, less often, at tube joints if condensation runs. The wet spot may show at the ceiling ring, which is not the roof cut.
Either leak is a flashing job, not a caulk ring from the attic. See skylight leak repair and roof leak repair.
How to choose without a catalog
Pick a skylight when you want a view, a vent, or a large daylight field in a room that already sits under a roof plane you can cut.
Pick a sun tunnel when the room is interior, the roof cut needs to stay small, or a hallway has no convenient roof above it.
Ask every bid for:
- Unit type and model, not “daylight.”
- Curb vs deck vs tile flashing kit.
- Tube length and bends, if a TDD.
- Interior finish (shaft vs diffuser).
- Permit and flashing as written lines.
Call (760) 750-5557 to match a licensed independent roofer who will pick the opening that fits this ceiling, not a catalog photo.