A chimney cricket (saddle) is a peaked diversion on the uphill side of a wide chimney so water does not sit against the back wall. The 2022 California Residential Code section R903.2.2 requires a cricket or saddle on the ridge side of any chimney or penetration more than 30 inches (762 mm) wide, measured perpendicular to the slope. Coverings shall be sheet metal or the same material as the roof covering. The 2022 California Building Code section 1503.5 says the same for buildings under that code, with “greater than 30 inches.”
Top Pro Roofing SD refers licensed independent C-39 roofers, and a mason when the brick is the problem. We do not build crickets. Call (760) 750-5557. Confirm the license on the CSLB lookup.
Flashing layers around the same chimney: chimney flashing repair. Service: flashing and vent repair.
How the 30-inch trigger is measured
Perpendicular to the slope, not along the chimney face that runs with the ridge. A chimney that looks “not that wide” from the street can still exceed 30 inches across the water path. Many Mission Hills, North Park, Kensington, and older East County chimneys predate a cricket. The stain at the uphill side is the usual interior clue.
Ask the AHJ which code and edition that address uses. City of San Diego, Chula Vista, Oceanside, and unincorporated county are not one desk. This blog is not the adopted code book. Read the current text.
The skylight exception people mix up
R903.2.2 excepts unit skylights installed in accordance with CRC R308.6 and flashed per the manufacturer. CBC 1503.5 excepts unit skylights under CBC 2405.5 with manufacturer flashing. A factory skylight of similar width is not automatically a cricket job. A 36-inch chimney still is, unless the AHJ tells you otherwise in writing.
Daylighting choice: sun tunnel vs skylight.
What the cricket is made of, and what it is not
Code allows sheet metal or the same covering as the field. On clay or concrete tile, that often means a metal saddle with tile woven over it, or a tile-covered cricket. On shingles, metal with shingles over the slopes is common. On standing seam, the metal cricket has to integrate with the panel system.
A smear of roofing cement on the uphill brick is not a cricket. A cricket without step flashing, counter-flashing, and an apron is an incomplete chimney. All four pieces belong on the bid, as the flashing-repair post already lists.
Coastal galvanized saddles rust. Aluminum, stainless, or copper belong in the salt strip. See will salt damage a metal roof and coastal salt.
What the inspection should photograph
- Chimney width measured perpendicular to the slope.
- Whether any saddle exists, and whether it is collapsed, rusted, or a mastic lump.
- Step, counter, and apron metal.
- Interior stain location relative to the uphill side.
- Roof covering type, because the cricket covering has to match or be metal.
A new cricket on a sound chimney is a flashing and sheet-metal job. A leaning chimney, failed crown, or open mortar is masonry first. Split those trades.
Call (760) 750-5557 if water shows on the uphill side of a wide chimney and you need a licensed independent roofer to measure it against R903.2.2, not against a guess from the curb.