Copper and aluminum both move rain off the eave. They do not age the same, they do not join to the same fasteners, and they do not cost the same class of job. This page is the metal choice. Width is 5-inch vs 6-inch gutters. Joints vs one long run is seamless vs sectional gutters. Vinyl vs aluminum in inland sun is vinyl vs aluminum gutters.
Top Pro Roofing SD refers licensed independent contractors. We do not fabricate gutters and we do not publish per-foot prices. Call (760) 750-5557. Confirm the license on the CSLB lookup. Service: gutter installation.
What each metal is doing
Aluminum. The default residential trough in this county. It does not rust like steel. Color is a factory paint or a coil finish. Dents show. Coastal salt is kinder to aluminum than to galvanized steel, which is why aluminum hangers and screws belong west of I-5 on repair work too. See gutter repair vs replacement.
Copper. Architectural metal. It starts bright and weathers to brown, then a green patina if you let it. You do not paint it to “keep it looking new.” That patina is the finish. It is the usual ask on older estates, custom homes, and copper-roof accents in Rancho Santa Fe, Fairbanks Ranch, and parts of La Jolla, not on a tract fascia that already has painted aluminum.
We will not invent a year life or a linear-foot total. Thickness belongs on the bid with the actual coil, not as a blog chart.
Salt, paint, and what you see from the street
West of I-5, painted aluminum fails at cut ends, inside miters, and at cheap zinc-plated screws first. The trough can still hold water while the hangers rust. Ask for aluminum or stainless fasteners on coastal aluminum. Galvanized steel troughs are the weak coastal ask. That ranking sits with other metals on coastal roof salt.
Copper does not need paint. Salt does not “rust” copper the way it rusts steel. Staining is the tradeoff: copper runoff can mark stucco and concrete below a downspout. If the house is cream stucco in Encinitas or Coronado, ask where the discharge lands and whether you want that streak. That is a design choice, not a defect in the metal.
Inland heat (El Cajon, Santee, Escondido) cooks paint on aluminum. Color fade and chalking show on south and west runs. Copper still patinas. Neither metal fixes a fascia that is already soft. Separate carpentry from the trough: fascia and soffit repair.
Galvanic contact is the hidden spec
Copper next to aluminum or steel plus moisture is a small battery. The less noble metal loses. Do not hang copper troughs with aluminum hangers and hope. Do not dump a copper downspout onto an aluminum underground drain without an isolation detail the installer will put in writing.
If the roof already has copper valleys or a copper accent, matching gutters is a look decision and a metal-compatibility decision. If the roof is painted steel, read Galvalume vs galvanized before you add copper at the eave.
What competing bids should name
- Metal and thickness, not “premium gutters.”
- Profile (K-style, half-round) and whether the run is seamless or sectional.
- Hanger type and fastener metal.
- How miters, outlets, and downspouts are joined.
- Discharge path, because a copper streak or an aluminum overflow both land on the same slab.
- Fascia condition, called out as stay, repair, or replace.
Repair of one failed aluminum joint is not a reason to jump to copper. Replacement of a whole elevation can be aluminum or copper. You pick the metal on the written scope. Call (760) 750-5557 to match a licensed independent pro who will name that metal.