The coating on the steel is the question, not the word metal. Galvalume-family coil is 55 percent aluminum-zinc on a steel core under ASTM A792. Galvanized coil is zinc on a steel core under ASTM A653. Those are different chemistries, and they age differently from Coronado to El Cajon.

Top Pro Roofing SD is a referral service. We match you with licensed independent C-39 roofers. We do not install, we do not sell coil, and we do not set prices. Call (760) 750-5557. Confirm the license on the CSLB lookup.

The coastal ranking without a year column is already on will salt damage a metal roof. This page is the coating decision on a steel panel. Aluminum, copper, and stainless are other substrates: steel vs aluminum. Service: metal roofing.

Two standing-seam steel panel samples compared on a coastal San Diego roof

What the two coatings actually are

Galvanized (ASTM A653). A zinc layer is bonded to steel. Zinc is sacrificial: it corrodes first to protect the steel. Coating designations such as G90 are A653 labels. They are not a brand promise and they are not a San Diego lifespan.

Galvalume and equivalents (ASTM A792). A 55 percent aluminum-zinc alloy coating on steel. Aluminum in that alloy forms a barrier. Zinc in that alloy still offers sacrificial behavior at cut edges. Trade names (Galvalume, Zincalume, and others) are licensed. The bid should name the ASTM spec, not a nickname.

We will not reprint supplier year tables or “two to four times the corrosion resistance.” Those lines belong to a manufacturer PDF for a named product, with coastal exclusions in the same PDF.

How San Diego exposure splits the choice

Chloride from the Pacific rides the marine layer. Morning damp turns that dust into a film. The ranking this site already uses, weakest to stronger near the water: galvanized steel, Galvalume, aluminum, stainless, copper. See coastal salt damage.

West of I-5 (Imperial Beach, Ocean Beach, La Jolla, Del Mar, Encinitas, Carlsbad, Oceanside) is a coating-and-fastener job. Plain galvanized field panels there are a future rust conversation. Galvalume can be the steel option when the finish stays intact, cut edges are detailed, and the warranty PDF does not exclude salt spray. Many coastal homeowners skip steel and ask for aluminum. That is a substrate change, not a coating upgrade.

Inland (Poway, Escondido, El Cajon, Santee, Ramona) still has UV and heat. Salt load is lower. Galvalume steel is a common inland spec when the architecture wants standing seam or a ribbed panel. Galvanized still needs a named coating weight and paint system. “Gray metal” on a bid is not a spec.

Cut edges, fasteners, and dissimilar metal

Coating lives on the coil face. Cuts, drill holes, and overdriven screws are where steel shows. Ask the written scope:

  • Coil spec: ASTM A792 or A653, coating designation, paint system if any (PVDF vs polyester).
  • Fastener metal. A coated panel with a cheap zinc-plated screw is a galvanic cell in salt air.
  • How eaves, valleys, and panel ends are treated. Bare cuts at the Pacific are a different risk than inland.
  • Contact with copper gutters, wet concrete, or treated lumber. Dissimilar metals plus moisture is a detailing problem. Put the isolation method in writing.

Oil canning (visible waviness in wide flats) is a different question: metal roof oil canning in San Diego. Profile choice (standing seam vs stone-coated) is standing seam vs stone-coated steel.

What to put on competing bids

Reject a line that only says “metal roof.” Ask each independent pro for:

  1. Substrate and coating (aluminum vs steel; A792 vs A653).
  2. Panel profile and coverage width.
  3. Underlayment product, because metal lives on the sheet below it: metal roof underlayment.
  4. Fastener or clip type, and whether panels can float with heat.
  5. Manufacturer warranty PDF, including coastal, animal-confinement, and cut-edge notes.
  6. Permit path for that city. City of San Diego IB 123 and CRC Chapter 9 are not a countywide stamp.

You contract with the matched roofer. This brand does not hold the warranty.

Call (760) 750-5557 if you want a licensed independent C-39 to name the coil on this roof, not a gray swatch from a truck.